_____Stu's___Dungeon__

Joyful Honda
  Treasure
  Lesson Room Cabs

In the beginning 
  2 3 4 5 6 7 8 9  
10
11 12 13 14 15
Jointer1  
Jointer2

Router Table1
 
Router Table 2

The Doors
  Do Pa
  Give Me A Brake
Cyclone
  Cyclone 2
  Cyclone 3
  Cyclone 4
  Liquor Shop Reno   Tenjinsama Shrine Tree Tour
Beer Shelves
  Wine Shelves 
 Five Cuts

Tod Evan's Doors

 

Building The Phoenix

The Phoenix Part II

Drill Press <NEW

DoPa 2007 <NEW

Turning
Jean Francious Escoulen

Eli Avisera Demo Day One

Eli Avisera Day Two

Lathe Stand!!
Turning 
Roughing It
 
Sharpening Station

Bowl Blank Processing
 
Captured Hollowing Rig <NEW

 Logging In Tokyo
  Woodlot Woodlot 2006 Woodlot 3 Woodlot 4
Chainsaw Mill
Chainsaw Mill Mk II

 

Links
Other Stuff  

The Phoenix

Building a Bandsaw Part II

Back at the job!

1_11_three_quarters_throat.jpg (59603 bytes) 2_13_inch_throat.jpg (60322 bytes) 3_frame_cut.jpg (62241 bytes) 4_frame_welded1.jpg (70406 bytes) 5_frame_cut_back1.jpg (72401 bytes)  

 6_frame_welded_stiff_backs.jpg (64958 bytes)   8_spacer_block.jpg (72787 bytes) 9_wedge_bottom_guide.jpg (67968 bytes) 10_wedge_bottom_guide2.jpg (65300 bytes) 11_near_14_inch_resaw.jpg (45746 bytes) 

12_bottom_bearing_block1.JPG (62063 bytes) 13_bottom_bearing_block2.JPG (66667 bytes) 14_table_mockup_front.jpg (65117 bytes) 15table_mockup_side.jpg (62358 bytes) 16_trunnion_side1.jpg (60675 bytes) 

17_trunnion_front.jpg (72010 bytes) 18_trunnion_side2.jpg (72862 bytes) 19_trunnion_held_in_place_on_saw.jpg (63208 bytes) 20_trunnion_front_view.jpg (60663 bytes) 21_trunnion_side_view.jpg (57757 bytes) 

22_trunnion_front_tilt.jpg (52268 bytes) 23_trunnion_back_at_45.jpg (58718 bytes) 24_45_angle_trunnion.jpg (61652 bytes) 25_trunnion_back_will_add_gusset.jpg (63484 bytes) 26top_blade_holder_front2.jpg (70909 bytes) 

27possible_resaw.jpg (65670 bytes) 28_possible_resaw_closeup.jpg (55241 bytes) 29_upper_guide_blocks.JPG (85945 bytes) 30upper_guide_blocks2.JPG (91550 bytes) 31_upper_guide_block_back.JPG (93652 bytes) 

32_upper_guide_block_close.JPG (91870 bytes)  33_over_view_almost1.JPG (88443 bytes) 34_over_view_almost2.JPG (96626 bytes) 35_over_view_almost3.JPG (86640 bytes) 36_feet.jpg (95223 bytes) 

37_gussets.jpg (96542 bytes) 38_new_top_guides.jpg (77879 bytes) 39_big_table.jpg (87603 bytes) 40_slice_resaw.JPG (37699 bytes) 41_first_curve_cut.JPG (36272 bytes) 

42_squared_up.JPG (35678 bytes) 43_back_square.JPG (30434 bytes) 44_under_table.JPG (58462 bytes) 45_square_cut.JPG (36547 bytes) 46_flex_test_zero.JPG (84723 bytes) 

47_flex_test1.JPG (98380 bytes) 48_flex_test_2.JPG (100134 bytes) 49_flex_test_3max.JPG (99065 bytes) 50_tension_tracking_adjuster_parts1.JPG (87746 bytes) 51tension_tracking_adjuster_parts2.JPG (96811 bytes) 

52tension_tracking_adjuster_cracks1.JPG (95269 bytes) 53tension_tracking_adjuster_cracks2.JPG (99016 bytes) 54tension_tracking_adjuster_cracks3.JPG (85633 bytes) 55tension_tracking_adjuster_cracks4.JPG (86754 bytes) 56tta1.jpg (97626 bytes) 

57tta2.jpg (100115 bytes) 58tta3.jpg (102156 bytes) 59tta4.jpg (90146 bytes) 60tta5.jpg (93403 bytes) 61tta6.jpg (85775 bytes) 

62tta7.jpg (87641 bytes) 63tta8.jpg (109352 bytes) 64tta9.jpg (101561 bytes) 66new_tension_tracking_adjuste1.JPG (69585 bytes) 67new_tension_tracking_adjuste2.JPG (57142 bytes) 

68curvy_cuts.jpg (41109 bytes) 69upper_guide_front_side.jpg (79349 bytes) 70upper_guide_head_on.jpg (65743 bytes)  71upper_guide_rear.jpg (75331 bytes) 72upper_guide_curvy_cut.jpg (67852 bytes) 

73hitachi_2hp_motor.jpg (33846 bytes) 74top_is_ok.jpg (83223 bytes)  75bottom_is_out.jpg (81308 bytes) 76top_roller_bearing_knob.jpg (83519 bytes)  77backside_jazzed_up.jpg (78411 bytes)  

78_4_inches_tall_round_cut.jpg (62622 bytes) 79_12_inches_tall_round_cut.jpg (71490 bytes) 80_12_inches_tall_round_cut2.jpg (70028 bytes) 81_stand_off.jpg (28576 bytes) 82new_guide_rod_mockup_1.jpg (71865 bytes) 

 83new_guide_rod_mockup_2.jpg (70913 bytes) 84big_guide_rod_blocks.jpg (53618 bytes) 85new_guide_bar_blocks.jpg (96540 bytes)  86new_guide_bar_blocks2.jpg (89124 bytes) 87_all_the_way_up.jpg (83081 bytes)  

88_all_the_way_down.jpg (81348 bytes) 89_threaded_set_screw_holes.jpg (94987 bytes) 90_new_phoenix_motor1.jpg (38988 bytes) 91_new_phoenix_motor2.jpg (42331 bytes) 92stand_off_guide_bar1.jpg (74125 bytes)  

93_stand_off_guide_bar2.jpg (66483 bytes) 94_stand_off_guide_bar3.jpg (60492 bytes) 95_stand_off_guide_bar4.jpg (76194 bytes) 96bottom_guides_thrust_bearing1.jpg (50696 bytes) 97bottom_guides_thrust_bearing2.jpg (46689 bytes)  

98bottom_guides_thrust_bearing3.jpg (44263 bytes) 99new_dowl_cut.jpg (44829 bytes) 100white_table_under.jpg (47604 bytes) 101white_table1.jpg (68509 bytes) 102white_table2.jpg (69568 bytes) 

 103test_cut.jpg (52208 bytes) 104insert_for_hole.jpg (26130 bytes) 105Setup_to_cut_hole.jpg (25639 bytes) 106hole_1st_cut.jpg (27602 bytes) 107_hole_2nd_cut.jpg (26818 bytes)  

108hole_done.jpg (21872 bytes) 109table_slot_ready_to_cut.jpg (53531 bytes) 110table_slot_cut.jpg (54413 bytes) 111slot_and_hole_done.jpg (37790 bytes) 112table_pin.jpg (54995 bytes)  

113table_pin_out.jpg (51991 bytes) 114table_done_close.jpg (35843 bytes) 115table_done.jpg (70791 bytes) 116table_done_back.jpg (61713 bytes) 117HI371460.JPG (60341 bytes)  

118_parking.JPG (41947 bytes) 119_stand1.jpg (53511 bytes) 120_stand2.jpg (51765 bytes) 121stand3.jpg (52483 bytes) 122_stand_bar1.jpg (53691 bytes) 

 123_stand_bar2.jpg (51706 bytes) 124_stand3_feet.jpg (53417 bytes) 125_bevel_plate.JPG (45399 bytes) 126_tack_clamp.JPG (47942 bytes) 127_plate_tacked.JPG (60872 bytes)  

128_plate_welded.JPG (51030 bytes) 129_plate_ground.JPG (54477 bytes) 130_motor_cage.JPG (76737 bytes) 131_motor.JPG (61570 bytes) 132_motor.JPG (61040 bytes) 

 133_motor_plate_tilt.JPG (62065 bytes) 134_belt_ength.JPG (41566 bytes) 135_lite1.jpg (58849 bytes) 136_lite2.jpg (61185 bytes) 137_lite_bright.jpg (47394 bytes) 

 138_clamped_ready_2_drill.jpg (59411 bytes) 139_waiting_4_a_belt.jpg (60275 bytes) 140_waiting_4_a_belt2.jpg (62854 bytes) 141_motor_hold_down1.jpg (54776 bytes) 142_motor_hold_down2.jpg (70940 bytes) 

 143_cutting_curves.jpg (46631 bytes) 144_cutting_tall_circles.jpg (40339 bytes) 145_cutting_tall_circles2.jpg (47552 bytes) 146shafted.jpg (31946 bytes) 147cutting_some_junk1.jpg (47166 bytes)

148cutting_some_junk2.jpg (53877 bytes) 149cutting_some_junk3.jpg (52731 bytes) 150cutting_some_junk3.jpg (52731 bytes) 150cutting_some_junk3.jpg (52731 bytes) 151keyways1.jpg (45547 bytes)

152keyway_drive_shaft.jpg (52596 bytes) 153keyways_pulley.jpg (55989 bytes) 154key.jpg (42099 bytes) 155new_key.jpg (51234 bytes) 156looking_like_a_saw.jpg (72346 bytes)

157looking_like_a_saw_top.jpg (51584 bytes) 158besseys_1st_use.jpg (48864 bytes) 159future_dc_mock_up.jpg (59070 bytes) 160future_dc_mock_up_front_shot.jpg (69480 bytes) 161future_dc_mock_up2.jpg (60182 bytes)

162more_like_a_real_saw.jpg (55512 bytes)  163bottom_door_straight1.jpg (48786 bytes) 164bottom_door_straight2.jpg (57538 bytes) 165bottom_door_angle1.jpg (51137 bytes) 166bottom_door_angle2.jpg (54154 bytes)

167shroud1.jpg (62516 bytes) 168shroud2.jpg (65295 bytes) 169shroud_test1.jpg (53201 bytes) 170shroud_test2.jpg (41409 bytes) 171shroud_test3.jpg (50975 bytes)

172new_straight_shroud1.jpg (69687 bytes) 173new_straight_shroud2.jpg (59011 bytes) 174new_straight_shroud3.jpg (61464 bytes) 176bottom_cover_closed.jpg (46799 bytes)   177bottom_cover_closed_front.jpg (53042 bytes)

178bottom_cover_back.jpg (44348 bytes) 179bottom_cover_open1.jpg (60636 bytes) 180bottom_cover_open2.jpg (53385 bytes) 181wheel_brush.jpg (78133 bytes) 182switch_wiring1.jpg (72046 bytes)

183switch_wiring2.jpg (63315 bytes) 1841st_cut_no_dc.jpg (73615 bytes) 1852nd_cut_dc.jpg (74644 bytes) 186_3rd_cut.jpg (54363 bytes) 187lots_of_cuts_dust.jpg (71289 bytes)

188thin_cuts.jpg (53987 bytes) 189thin_cuts_edge.jpg (49443 bytes) 190thin_cuts_1_mm.jpg (42135 bytes) 191many_cuts_table_dust.jpg (55830 bytes) 192new_holes_throatplate.jpg (64584 bytes)

 193new_holes_throatplate2.jpg (79477 bytes) 194swiss_cheese.jpg (51650 bytes) 195swiss_cheese_no_dust.jpg (44782 bytes) 196knee_bump1.jpg (52976 bytes) 197knee_bump2.jpg (49578 bytes)